At $5,00 certainly good bang for your buck. Includes electric schematics as well as exploded parts view + parts list for reordering. Unfortunately no details on the PCB contents or working, but then again, this is not overly complex. Best bonus: this manual does contain the heavily searched for LED error codes as well as descriptions for test operation. Haven't gotten around to fixing the machine yet, one thing the manual won't do for you is getting it out of the kitchen assembly :-(
Very Good! All the diagram are easy to read, and its complete.
Text excerpt from page 32 (click to view)
NO WATER SUPPLY
Is the water supply shut-off?
NO
Is the tap opened?
NO YES
Open the tap.
When you press both Wash button and Rinse buttons simultaneously, is the water level frequency below 40? NO Is the inlet valve filter clogged with impurity?
YES
Check the chamber (Air) and the tube clogged with impurity.
YES
Clean the filter.
NO
Is resistance of the inlet valve connector k? between 2 to 8
NO
Replace the inlet valve.
YES
Check the voltage between each terminal of inlet Valve is 220~240V. (Refer to 7-2 TEST MODE) Replace PWB assembly (Main).
NO
DETERGENT DOES NOT FLOW IN
Is water supplied?
NO YES
Refer to solution NO INLET
Wiring diagram
Are replaceptacles correctly connected to the terminals of inlet valve?
NO
Check the wiring on the dispenser. Put the detergent in the correct position
YES
SOFTENER MAIN PRE WASH WASH
Is detergent put in the correct compartment of the drawer?